| Availability: |
In stock
(1)
|
FREE SHIPPING IN THE CONTINENTAL US!
The 40th Anniversary Freestyler was created to take a DNA strand or two from our past and thread it into state of the art contemporary designs of the present. Look at this masterpiece, from a glance it's difficult to tell from the original 40 years prior. But when you look closely, you will see all modern technology. Hourglass Mid BB, internal headset. Forks are full heat treated and butted same as the lineage bars and 48 spline 19mm cranks. This bike is as high level BMX you are going to buy in todays market.
- 100% chromoly Lineage Freestyler frame with twin top tube, Mid BB shell, integrated head tube and Lineage cast dropouts with integrated chain tensioners
- 100% heat treated chromoly Lineage fork with CNC threaded steer tube, investment cast drop-outs and 990 brake mounts with internal brake cable routing
- 100% heat treated and butted chromoly Lineage bars 8.5" with Haro Lineage CNC alloy top load stem
- Lineage heat treated 3-piece alloy 165mm cranks with Bob Haro Lineage 28T CNC alloy bolt drive sprocket and sealed Mid BB
- Fully sealed 36H wheels with Lineage high flange hubs and double-wall hi polished alloy rims
- Haro Snakebite tires 20 x 2.125" front and rear
- Haro Lineage padded stealth Pivotal seat with alloy Lineage Pivotal fluted post
- Oakley B1B Grips, just like Bob Haro rode in 1982
| Frame |
Lineage Freestyler frame - 20.5" full crmo; internal h/t crmo - welded brake mounts. |
| Fork |
Haro Lineage fork with 990 mounts and internal cable routing; 33mm offset; 3/8" axle; fluted one piece cnc cr-mo steerer; tapered fluted legs |
| Colors |
Chrome |
| DRIVETRAIN |
|
| Cranks |
Haro Lineage Cromoly tubular cranks (bolt drive interface) rsd and lsd; 165mm; 19mm od 48-spline spindle; heat treated 4130 |
| Bottom Bracket |
Sealed MID BB |
| Sprocket |
BOB Lineage sprocket; cnc bolt drive sprocket; 5mm alloy ring; 1/2" x 1/8" x 28t ; cross ring w/ machined teeth, included sprocket adapter |
| Gearing |
28/14 |
| Pedals |
Haro Fusion; alloy pedal body; crmo axle |
| Chain |
KMC K1Sl; 1/2 x 1/8; Narrow Silver Super Lite |
| WHEELS |
|
| Tires |
Snakebite; 20x2.00; 60 max psi |
| Front Hub |
Lineage high flange 36h alloy hub body; 3/8"x100wx155l; crmo 155mm straight axle; 2 sealed bearings |
| Rear Hub |
9t Lineage high flange hub (male bolt); sealed bearings; 14t driver; 17mm steel flange axle nuts; all hardware in cp finish including cone nuts, axle nuts |
| Rims |
Lineage 36h rims (double wall welded joint) Silver |
| BRAKING SYSTEM |
|
| Brake |
Dia-Compe fs996 "hombre" u-brake; cold forged aluminum arms; dual spring tension adjustment w/anchor bolt parts |
| Brake Lever |
Dia-Compe "tech-77" lever without stopper; right and left side; diecast aluminum bracket with hinged clamp; cold forged aluminum lever |
| Rotor |
Teflon bearing gyro - full cnc 6061 t6 included a-plate |
| OTHER COMPONENTS |
|
| Grips |
Oakley grip; 145mm length x 29mm diameter; 50mm od flange |
| Handlebar |
Lineage bar 8.5"; 100% heat treated; multi-butted |
| Stem |
Haro Lineage top load stem; T6 alloy; cold forged with cnc; 45mm |
| Headset |
Sealed Integrated, 1 1/8" |
| Seat |
Haro Lineage slim stealth pivotal seat |
| Seat Post |
Haro stealth pivotal seat post; 25.4 x 300mm |
| Seat Post Clamp |
Dia Compe MX clamp; alloy 6061 |
| Pegs |
6061 alloy pegs; 34mm od; 110mm length; include 4 total pegs |
-
-
Geometry & Sizing
| Size |
A. Head Angle |
B. Seat Angle |
C. Top Tube |
D. Seat Tube |
E. Chainstay |
F. BB Height |
G. Stand Over |
| 20.5 |
75° |
70° |
20.5" (520mm) |
10.2" (260mm) |
13.7" (339mm) |
11.5" (293mm) |
21.5" (546mm) |
